How to cover a facade with materials based on synthetic resins?

PROBLEM: covering a facade with products based on synthetic resins

Painting or covering a facade with products that are easy to use, stable over time, resistant to strong mechanical and physical stresses but above all that adhere to any type of mineral or synthetic substrate, whether new or already treated and with a very wide choice of range.

SOLUTION: acrylic coatings for smooth plasters

Smooth finishes for smooth or civil plasters

1. Any molds must be treated with BIOCID algaecide and fungicide solution.

2. If it is necessary to completely remove old paint and / or coatings, remove the paint with a paint remover.

3. Wash at high pressure, brush or scrape the entire facade, cleaning it from any crumbling or flaking paint, eliminating all traces of dirt or dust.

4. Carry out any repairs to the plaster and / or grouting with materials compatible with the existing ones.

5. Apply a coat of ISOMUR pliolite-based solvent-based fixative sealer.

6. If the fund è slightly irregular, for a better aesthetic finish, apply a coat of SEVEN elastosiloxane uniforming primer for exteriors, if very irregular, smooth with LAMPOCIVIL R632 universal white smoothing compound with civil finish and leave to cure for 10 days.

7. Apply by brush or roller two coats of INFINITY 406 QUARZ super-washable quartz acrylic water-based paint, resistant to mold and algae growth, or 508 QUARZ fine micro-coating, or QUARZO COAT quartz-filling micro-coating to be added with MUFFALGANÒ additive.

SOLUTION: acrylic coatings for rustic finishes

Rustic or float finishings for rustic or civil plasters

1. Any molds must be treated with BIOCID algaecide and fungicide solution.

2. If it is necessary to completely remove old paint and / or coatings, use the paint remover.

3. Wash at high pressure, brush or scrape the entire facade, cleaning it from any crumbling or flaking paint, eliminating all traces of dirt or dust.

4. Carry out any repairs to the plaster and / or grouting with materials compatible with the existing ones.

5. Apply a coat of ISOMUR. solvent-based solvent-based insulator;

6. If the fund è very irregular, smooth with LAMPOCIVIL R632 universal white smoothing compound with civil finish and leave to cure for at least 10 days.

7. Apply a coat of appropriately diluted FIXACRIL PIGMENTATO or FONDO PREVEN PIGMENTATO (ready for use) and wait 6-8 hours.

8. Application by trowel of a shaved, microfiber, tonachino effect wall covering for exteriors, based on acrylic copolymers in aqueous emulsion, light-resistant pigments, anti-mold and anti-algae additives, siliceous sands and marbles with constant grain size, LAMATO COAT PREVEN, in the 100/120/150 versions.

9. Alternatively è It is possible to use the CLASS COAT PREVEN 120/150 product