How to standardize a facade with uneven surfaces with filling and masking primers?

INDICATIVE AMOUNT OF MATERIAL PER SQM

1

If there is mold present, apply a preventive treatment by using BIOCID solution and let it work for at least 24 hours.

10 SQM/L

2

Remove any degraded or detaching plaster. High-pressure clean, brush or scrape the entire facade to eliminate any flaking or detaching paint, removing all traces of dirt or dust.

3

Demolished portions of plaster should be re-plastered with medium-rapid setting, low elastic modulus anti-shrinkage mortar PAULINPLASTER K638, after initial roughing with PAULINSANA RINZAFFO F750.

14 KG/SQM

4

Once dry, consolidate the surfaces by applying silicate primer SILK PRIMER. Product conforms to DIN 18363.

8 - 10 SQM/L

5

Brush on one or two coats of mineral base connecting filler primer for silicate paints SILK PF523 in a crisscross pattern after 12-24 hours.

0.3 - 0.5 KG/SQM

6

Finish with a final decoration by applying potassium silicate-based mineral paint SILK FINISH with brush in two or more coats. Product conforms to DIN 18363.

0.20 KG/SQM

INDICATIVE QUANTITY OF MATERIAL PER SQM

1

If mold is present, apply preventative treatment by using BIOCID solution and leave it to act for at least 24 hours.

10 SQM/L

2

Remove any degraded or detached portions of plaster. High-pressure water wash, scrub, or scrape the entire facade to clean it from any flaky or detached paint, eliminating all traces of dirt or dust.

3

Demolished portions of plaster should be re-plastered with quick-setting medium elastic modulus non-shrink mortar PAULINPLASTER K638 after roughing it with PAULINSANA BASE COAT F750

14 KG/SQM

4a

Apply a coat of water-based high penetration fixative FIXACRIL appropriately diluted.

10 - 15 SQM/L

4b

Apply a coat of solvent-based styrene acrylic consolidating primer ISOMUR in case of highly flaky or poorly cohesive substrates.

10 SQM/L

5

After 12-24 hours, brush or roll on a coat of smoothing base SEVEN made of elastomeric and siloxane resins, with a maximum grain size of 0.5 mm.

4 -5 SQM/L AS BASE COAT
1.5 SQM/L AS SKIM COAT

6a

Final decoration by applying water-based paints or quartz micro-coatings made of acrylic resins, resistant to algae and mold growth, QUARTZ COAT.

6 - 7 SQM/L
PER COAT

6b

Final decoration by applying water-based paints or quartz micro-coatings made of acrylic resins, resistant to algae and mold growth, 508 QUARTZ.

7 - 9 SQM/L
PER COAT

6c

Application of two coats of quartz acrylic water-based paint, super washable, super opaque, particularly resistant to algae and mold growth, INFINITY QUARTZ.

6 - 8 SQM/L
PER COAT

INDICATIVE AMOUNT OF
MATERIAL PER SQM

1

If there are mold issues, a preventive treatment with BIOCID solution should be applied and left to act for at least 24 hours.

10 SQM/L

2

Remove any degraded or detached plaster parts. High-pressure hydro-washing, brushing, or scraping the entire facade to clean it from any flaky or detached paint and eliminate any dirt or dust.

3

Demolished portions of plaster should be re-plastered with a medium-fast setting, low elastic modulus anti-cracking mortar PAULINPLASTER K638 after applying a scratch coat with PAULINSANA RINZAFFO F750.

14 KG/SQM

5

After 12-24 hours, brush or roll on a coat of uniforming primer SEVEN based on elastomeric and siloxane resins, with maximum grain size of 0.5 mm.

4-5 SQM/L AS PRIMER
1.5 SQM/L AS SMOOTHING

6a

Final decoration with application of breathable, water-repellent, mold and algae-resistant siloxane paint, acrylic siloxane SANO FINISH.

8-10 SQM/L
PER COAT

6b

Final decoration with application of breathable, high-filling, water-repellent, mold and algae-resistant siloxane paint, acrylic siloxane SANO FILL.

6-8 SQM/L
PER COAT

6c

Application of two coats of highly breathable and water-repellent siloxane paint, self-cleaning and mold and algae resistant due to applied nanotechnology, NANOTECH SILOX.

6-8 SQM/L
PER COAT