How to renew an old layout without removing it?

Home - Issues and Solutions - Outdoor Solutions - Rinnovare vecchio plastico senza rimuoverlo

PROBLEM: Renovate a facade with plastic cladding without removing it

Often in big cities, we find ourselves facing facades with well-preserved and resistant plastic coverings, but now no longer current. Scraping or stripping becomes an unbearable cost that sometimes makes us give up on renovation.

SOLUTION:

Translated sentence:

CYCLE

INDICATIVE QUANTITY OF MATERIAL PER SQM

1

Treatment with BIOCID solution applied with a brush to waste, ready to use. After at least 24 hours from the application, proceed with mechanical cleaning of the surfaces. The formula can be applied to both pre-painted and unpainted substrates.

10 SQM/L

 

Remove any small parts of degraded or peeling plaster. Scrape off any portions of degraded or peeling coating. Wash all surfaces extensively with a water jet to eliminate any traces of dirt or dust. Make any necessary plaster repairs and/or fillings with materials compatible with the existing ones.

2
The small portions of already demolished plaster must be replastered with medium rapid-setting low elastic modulus anti-cracking mortar PAULINPLASTER K638, after applying PAULINSANA RINZAFFO F750 bonding basecoat for plaster.

PAULINSANA
RINZAFFO F750

16 -17 KG/SQM
PER CM OF THICKNESS

PAULINPLASTER K638

14 KG/SQM

3a
Apply a coat of water-based deeply penetrating FIXACRIL fixative suitably diluted.

10 - 15 SQM/L

3b

Apply a coat of solvent-based styrene acrylic consolidating primer ISOMUR in case of particularly friable, poorly cohesive, or stripped surfaces.

10 SQM/L

A: Reinforced skim coat for final coating with a rustic effect

```html

CYCLE

INDICATIVE QUANTITY OF MATERIAL PER SQ.M

4

Realization of reinforced skim coat by applying the specific high-adhesion skim coat and subsequent embedding of the specific alkali-resistant 160 g/sqm fiberglass mesh PK GRID PLUS or PK GRID with the "fresh on fresh" technique until complete drowning. The mesh, applied in vertical sheets, will then be laid on a bed of skim coat and immersed between two layers of skim coat.

10 SQ.M/L

a
  • LAMPOKAPPA PK6A / P6A White Skim coat gray and white with max 0.7mm granulometry.
3.0 - 4.0 KG/SQ.M

b
  • LAMPOKAPPA R631 Gray skim coat with max 0.7mm granulometry.

3.0 - 4.0 KG/SQ.M

c
  • LAMPOKAPPA G Gray skim coat with max 1.2mm granulometry.

3.5 - 4.5 KG/SQ.M

d
  • PK RAS Light-colored organic skim coat with max 0.5mm granulometry.

3.0 - 4.0 KG/SQ.M

e
  • LAMPOKAPPA ALLEGGERITO Lightened white skim coat with hollow glass microspheres with max 1.0mm granulometry. Extremely filling.

2.5 - 3.0 KG/SQ.M

f
  • RASAKOLL MINERALE Mineral skim coat, breathable, with max 1.2mm granulometry.

3.5 - 4.5 KG

B: Thick rustic effect finishes

CYCLE

INDICATIVE AMOUNT OF MATERIAL PER SQM

5

Apply one coat of FIXACRIL PIGMENTATO appropriately diluted or FONDO PREVEN PIGMENTATO (ready to use)
(Recommended process to improve overall system characteristics).

8 - 10 SQM/L

 

Acrilic coatings.

 

6a

Spreading with a spatula of exterior wall coating shaved,
with a tonachino effect, light resistant pigments, CLASS COAT or CLASS COAT PREVEN (resistant to mold and algae growth),
in versions 120/150.

2.0 - 2.5 KG/SQM (120)
2.5 - 3.0 KG/SQM (150)

6b

Spreading with a spatula of exterior wall coating shaved, with a tonachino effect, light resistant pigments, LAMATO COAT or LAMATO COAT PREVEN, (resistant to mold and algae growth), in versions 100/120/150.

1.8 - 2.2 KG/SQM (100)
2.0 . 2.5 KG/SQM (120)
2.5 . 3.0 KG/SQM (150)

6c

Spreading with a spatula of GRAF COAT 180, continuous wall coating with a scratched effect.

2.8 / 3.0 KG/SQM

 

Silosan / Acril-silossanic coatings.

 

6d

Spreading with a spatula of micro-fibered exterior wall coating,
shaved, with a tonachino effect, light resistant pigments,
consisting of acrylic-siloxane resins in emulsion SANO COAT,
resistant to mold and algae growth, in versions
70/100/120/150.

2.5 , 3.0 KG/SQM (70)
1.8 - 2.2 KG/SQM (100)
2.0 . 2.5 KG/SQM (120)
2.5 . 3.0 KG/SQM (150)

6e

Spreading with a spatula of micro-fibered exterior wall coating,
shaved, with a tonachino effect, light resistant pigments,
consisting of siloxane resins in emulsion SILOX COAT,
resistant to mold and algae growth, in versions
100/120/150.

C: Reinforced smoothing for brush and/or roller finishing

Translate the following sentence into English: "Table class="tableview" style="border-collapse: collapse; border-spacing: 3px; cursor: default; width: 98.2913%; height: 474px;" cellspacing="0">

CYCLE

INDICATIVE QUANTITY OF MATERIAL PER SQM

4

Construction of reinforced skim coating by applying, the specific plaster with high adhesion and subsequent immersion of the specific alkali-resistant 160 g/mq fiberglass mesh
PK GRID PLUS or PK GRID with the "fresh on fresh" technique until complete drowning. The net, applied in vertical sheets, will be
then laid on a bed of plaster and immersed between two layers of skim coating and topped with 10 cm between sheet and sheet.

Application of subsequent third layer of skim coating with a civil effect processing using a sponge trowel.

1.10 SQM/SQM

a
  • LAMPOKAPPA PK6A / P6A White
    Gray and white plaster with max 0.7mm granularity.
3.5 - 4.5 KG/SQM

b
  • MINERALCIVIL
    White plaster with max 0.7mm granularity.

3.5 - 4.5 KG/SQM

c
  • LAMPOKAPPA G
    Gray plaster with max 1.2mm granularity.

4.0 - 5.0 KG/SQM

d
  • RASAKOLL MINERAL
    Mineral plaster, breathable, with max 1.2mm granularity.

4.0 - 5.0 KG/SQM
"

D: Finishing with brush and/or roller

translate the following sentence into Italian: The acrylic paints.

You may also be interested in

Bonificare e incapsulare una superficie in cemento-amianto

Bonificare, ripristinare e proteggere un calcestruzzo parzialmente degradato

Trattare un calcestruzzo a vista con finitura trasparente

How to renew an old scratched plastic without removing it
WhatsApp E-Mail Copia URL Messenger Facebook LinkedIn