How to repaint aluminum, iron, cast iron radiators?

PROBLEM

In almost all of it; of homes and public and private buildings, there are radiant elements. Often è difficult to identify the nature of the elements themselves or of the subsequent paintwork. It becomes essential to use glazes that have good compatibility; on different substrates and at the same time easy to apply.

SOLUTION: treatment of aluminum, iron and cast iron radiators

CYCLE: Application of ZINCOLAC PRIMER dilute the product with DILUENTE UNIVERSALE DL600 for brush or roller applications. Do not exceed the thickness to avoid wrinkling and abnormal drying. If it is necessary to achieve greater thicknesses, carry out a further application after the previous è dried. Wait at least 12 hours between subsequent applications.

QUANTITÀ INDICATIVE OF MATERIAL PER SQM:   7 - 8 SQM / LT. BY HAND

SOLUTION: Floor & Tiles

CYCLE:   Apply the first coat of FLOOR & TILES all&rsquo enamel resin; water satin based on acrylic resins, pigments and adhesion promoters. Then apply the second coat after 6-8 hours. DILUTION and MIXING. Add 5 # 37 d’ water to the product FLOOR & TILES and do not shake. Immediately after, add the 40 ml bottle of PROMOTORE DI ADESIONE for the 750cc bottle and 135 ml for the 2.5 liter bottle.

Mix well and apply a first coat.
 

QUANTITÀ INDICATIVE OF MATERIAL PER SQM:   12 - 14 M2 / LITER PER HAND

SOLUTION: Water-based enamel - Glossy / Satin

CYCLE:   Apply two coats of ENAMEL ALL’ ACQUA - LUCIDO / SATINATO for interiors based on non-yellowing acrylic resins, spaced 8-12 hours apart.

QUANTITÀ INDICATIVE OF MATERIAL PER SQM:     12 - 14 SQM / LT. BY HAND