How to protect and decorate wooden artifacts?

CYCLE

INDICATIVE QUANTITY OF MATERIAL PER SQM

 

In any case, before starting work, make sure the wood is seasoned, dry, and if applying it outdoors, that the temperature is mild and the day is not humid. Also, avoid applications in full summer sun. The support, if new, must be sanded with sandpaper in the direction of the grain; if already painted, the old paint must be completely removed using appropriate means. It is possible to use hot, mechanical, or chemical strippers.

 

1b

Impregnating: apply a first coat of WOOD SEALER as is, preferably with a brush in the chosen wood color, smoothing the product in the direction of the grain. After 12-24 hours, lightly sand and apply a second coat. Deep drying is achieved after about 24-36 hours.

10-14SQM/L PER COAT

2b

Satin impregnator: apply a first coat of WOOD SEALER as is, preferably with a brush in the chosen wood color, smoothing the product in the direction of the grain. After 12-24 hours, lightly sand and apply a second coat. Deep drying is achieved after about 24-36 hours. Apply a coat of WAXED WOOD SEALER.

10-15SQM/L

 

It is recommended to avoid creating multiple layers of product.

 

CYCLE

INDICATIVE QUANTITY OF MATERIAL PER SQM

 

In any case, before starting the work, make sure that the wood is seasoned, dry and if applying outdoors, that the temperature is mild and the day is not humid. Also, applications in full summer sun should be avoided. The support, if new, must be sanded with sandpaper in the direction of the grain; if already painted, old paint must be completely removed using appropriate means. It is possible to use hot, mechanical or chemical paint removers.

1a

Impregnating agent: apply a first coat of WATER-BASED IMPREGNATING AGENT as it is, preferably with a brush in the chosen wood color, smoothing the product in the direction of the grain. After 12-24 hours, lightly sand and apply a second coat. Deep drying is achieved after about 24-36 hours.

12-15 SQM/L PER COAT

1b

Satin impregnating agent: apply a first coat of WATER-BASED IMPREGNATING AGENT as it is, preferably with a brush in the chosen wood color, smoothing the product in the direction of the grain. After 12-24 hours, lightly sand and apply a second coat. Deep drying is achieved after about 24-36 hours. Apply a coat of WAXED WATER-BASED IMPREGNATING AGENT.

12-15 SQM/L PER COAT

 

It is advisable to avoid creating thick layers of the product.

 

CYCLE

INDICATIVE QUANTITY OF MATERIAL PER SQM

 

In any case, before starting the work, make sure the wood is seasoned, dry, and if applying it outdoors, that the temperature is mild and the day is not humid. Even summer sun applications should be avoided. If the support is new, it must be sanded with sandpaper in the direction of the grain; if already painted, the old paints must be completely removed using appropriate means. It is possible to use hot, mechanical, or chemical paint strippers.

Solvent Finish

1a

Apply a first coat of GLOSSY FLATTING as is, and after 24 hours apply a second coat. Deep drying is achieved after approximately 36-48 hours.

12-14 SQM/L PER COAT

1b

Apply SEA FLATTING product indicated for precious woods exposed to particularly unfavorable microclimates such as the marine environment or particularly sunny, to be applied in the same way as GLOSSY FLATTING.

12-14 SQM/L PER COAT

 

 

1c

Apply a coat of WATER BASED FLATTING and after 4-6 hours a second coat. Deep drying is achieved after approximately 36-48 hours. If desired, before the flatting, it is possible to apply one or two coats of WATER BASED SEALER in the same way as mentioned above.

12-15 SQM/L PER COAT

 

It is advisable to avoid creating many layers of product.

 

PHASE

INDICATIVE QUANTITY OF MATERIAL PER SQM

 

If the substrate is new, it must be sanded with fine sandpaper; if already painted, the layer of enamel or surface paint must be sanded; if necessary, wash with water and detergents and let dry thoroughly.

1

Any minor imperfections on internal surfaces can be patched with SPACKLE. It should be applied in one or two coats if the imperfection requires it and after 2-3 hours from the second coat, it should be sanded until the substrate is completely flat.

12-14SQM/L PER COAT

2

Remove sanding residues and apply one or two coats of WATER-BASED UNIVERSAL PRIMER. After 24 hours, lightly sand with fine sandpaper to remove any raised edges, remove the residues.

9-11SQM/L PER COAT

3a

Apply two coats of WATER-BASED ENAMEL - GLOSSY/SATIN based on non-yellowing acrylic resins spaced 8-12 hours apart.

12-14SQM/L PER COAT

3b

If you want to achieve a finish of maximum fullness and robustness comparable to the performance of a solvent-based product, apply two coats of URETHANE ENAMEL - GLOSSY/SATIN spaced 24 hours apart.

8-10SQM/L PER COAT

 

It is recommended to avoid creating too many product layers.