How to repaint/cover a facade with siloxane products?

INDICATIVE QUANTITY OF MATERIAL PER SQM

1

In case of mould, preventive treatment by applying BIOCID solution and let it act for at least 24 hours.

10 SQM/L

2

If it is necessary to remove old paints and/or coatings completely, strip with paint stripper. High-pressure hydro wash, brush or scrape the entire facade to clean it from any flaking or peeling paints, removing any traces of dirt or dust. Carry out any necessary repairs with plaster and/or suitable fillers.

3a

Upon dry repairs, consolidate the surfaces by applying water-based primer with high penetration PRIMER S appropriately diluted.

10 - 15 SQM/L
PER COAT

3b

Apply a coat of consolidating styrolo acrylic solvent-based primer ISOMUR in case of particularly flaky, poorly cohesive or stripped substrates.

10 SQM/L

4

If very uneven, skim with universal white fibrous skim coat MINERALCIVIL for a civil finish and let it age for 10 days.

On aged support, repeat step 3a.

1,25 KG/SQM
PER MM OF THICKNESS

5a

Final decoration with application of breathable, water-repellent, mould and algae-resistant siloxane paint, acrylic siloxane SANO FINISH.

8 - 10 SQM/L
PER COAT

5b

Final decoration with application of breathable, high-fill, water-repellent, mould and algae-resistant siloxane paint, acrylic siloxane SANO FILL.

6 - 8 SQM/L
PER COAT

INDICATIVE QUANTITY OF
MATERIAL PER SQM

1

If there is mold present, perform preventive treatment by applying BIOCID solution and let it act for at least 24 hours.

10 SQM/L

2

If it is necessary to completely remove old paints and/or coatings, strip with paint stripper. High-pressure clean, brush or scrape the entire facade to remove any flaky or peeling paints, dirt or dust. Make any necessary plaster or patch repairs with materials compatible with those already existing.

3a

Once dry, strengthen the surfaces with the application of water-based deeply penetrating primer PRIMER S properly diluted.

10 - 15 SQM/L
PER COAT

3b

Apply a coat of consolidating primer based on solvent-based acrylic styrene ISOMUR in the case of particularly flaky, poorly cohesive or stripped substrates.

10 SQM/L

4

If very uneven, skim with universal white fibrous skim coat MINERALCIVIL for a civil finish and let it cure for 10 days.

If the support has cured, repeat step 3a.

1.25 KG/SQM
PER MM OF THICKNESS

5

Apply a coat of diluted pigmented preventive primer FONDO PREVEN.

8 - 10 SQM/L

6a

Apply with a spatula a micro-fibered wall coating for outdoor skimming, with a tonachino effect, light-resistant pigments, consisting of acrylic-siloxane resins in emulsion SANO COAT, resistant to mold and algae growth, in the versions 70/100/120/150.

2.5 , 3.0 KG/SQM. (70)
1.8 - 2.2 KG/SQM. (100)
2.0 . 2.5 KG/SQM. (120)
2.5 . 3.0 KG/SQM. (150)

6b

Apply with a spatula a micro-fibered wall coating for outdoor skimming, with a tonachino effect, light-resistant pigments, consisting of siloxane resins in emulsion SILOX COAT, resistant to mold and algae growth, in the versions 100/120/150.

1.8 - 2.2 KG/SQM. (100)
2.0 . 2.5 KG/SQM. (120)
2.5 . 3.0 KG/SQM. (150)